Two-toned. Fluorescent with reflective tape. ULTIMATE STRETCH. Anti-static, acid-protective and flame retardent. Protects from electric arcs. Wind and waterproof. Taped seams. Prepared for holster pockets, attachable with the Click Pocket System. Ergonomically formed trouser leg. Belt loops. Fly with zip. Strong, elastic, detachable, adjustable braces. The waistband is higher at the back, to better protect against the cold. Adjustable kneepad pockets with CORDURA fabric. Zip with storm flap on inside of lower legs. The product has a surface treatment that is repellent and resistant to the permeation of sulfuric acid and sodium hydroxide in accordance with EN 13034 Type 6. Co-certified together with kneepad type large in accordance with EN 14404-3.
OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
EN 1149-5 (tested according to EN 1149-3) - EN 1149-5 (tested according to EN 1149-3)
EN ISO 11612 - EN ISO 11612 (A1, B1, C1, E2, F1)
EN 13034 (Type 6) - EN 13034 (Type 6)
EN ISO 24232 4-1-X - EN ISO 24232 4-1-X
EN 61482-1-2 APC 2 - EN 61482-1-2 APC 2
EN IEC 61482-1-1 - EN IEC 61482-1-1 (ELIM 30 cal/cm², ATPV 40 cal/cm²)
EN ISO 20471 - class 2 - EN ISO 20471 - class 2
Hi-Vis Group Y - Hi-Vis Group Y
- OEKO-TEX® STANDARD 100
- EN 1149-5 (tested according to EN 1149-3)
- EN ISO 11612 (A1, B1, C1, E2, F1)
- EN 13034 (Type 6)
- EN 13034, category K
- EN ISO 24232 4-1-X
- EN 61482-1-2 APC 2
- EN IEC 61482-1-1 (ELIM 30 cal/cm², ATPV 40 cal/cm²)
- EN ISO 20471 - class 2
- Hi-Vis Group Y
Due to the unique properties of the fabric, logo printing is only available through the use of specific transfer types. As this is a safety product, we strongly recommend that MASCOT affix the logo to reduce the risk of errors. Please contact customer service for further information.
The product is certified with a maximum logo area of 0,2000m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
Man
No liability accepted for product alterations.